We’re changing the world of medical devices one implant at a time. Catch up on all the latest developments on PrinterPrezz.
PrinterPrezz, Inc., a trailblazer in combining polymer and metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced the exclusive, worldwide license of Spinal Interbody Device technology patent rights from the University of California, San Francisco (“UCSF”).
Now, any of the 115+ Fremont-based biotech companies can be permitted to produce medical supplies in less than a week compared to the nearly 4 months it would take previously before the process was streamlined. PrinterPrezz – Known for its 3D printing capabilities, PrinterPrezz is now working with key partners to utilize its rapid prototyping capabilities…
Shetty is CEO and co-founder of PrinterPrezz, a startup launched with this challenge in mind. The company is interesting not only for the conduit it potentially brings to medical devices — that is, a single pipeline from surgeon inventor through development and regulatory approval and into manufacturing — but also because of the important point…
September 25, 2019—FREMONT, CA—(BUSINESSWIRE)—PrinterPrezz, Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced an agreement to work together on new spinal interbody fusion devices with Osseus Fusion Systems, a Dallas-based medical device company focused on spine products. The two companies have been…
September 26, 2019—FREMONT, CA-(BUSINESSWIRE)— PrinterPrezz Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced that Steven Garfin MD, Interim Dean, UC San Diego School of Medicine, will join the PrinterPrezz advisory board. An internationally acclaimed leader in Spine surgery, Dr. Garfin joined…
July 25, 2019—FREMONT, CA—(BUSINESSWIRE)—PrinterPrezz, Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced support for surgeon education in the orthopaedic subspecialties of Spine and Arthroplasty through OMeGA Medical Grants Association (OMeGA), an independent, not-for-profit corporation specializing in third party grants administration supporting…
FREMONT, Calif.–(BUSINESS WIRE)– PrinterPrezz Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced that Arthur Zafiropoulo, a visionary recognized for his leadership skills and technical expertise throughout the semiconductor industry, will join its board of advisors. Having served most recently as Chairman…
University of California San Francisco Surgical Innovations partnered with PrinterPrezz in an initiative to bring innovative medical devices to the forefront faster. A co-located center at PrinterPrezz was established, offering engineering and manufacturing access as well as an open ecosystem of technology that encourages the commercialization of new ideas quicker.
California-based medical 3D printing service bureau PrinterPrezz has partnered with UCSF Surgical Innovations, an incubator-accelerator for medtech innovators at UC San Francisco. PrinterPrezz is looking to open a new co-location facility which will leverage the medical expertise of UCSF to develop new IP. The hope is that this will further research and development of 3D printed medical products, with…
PrinterPrezz received certification for Quality Management Systems for the 3D printing of medical devices. Three things to know: 1. The company is certified for the 3D printing of titanium, non-titanium metals and advanced resin and plastic implantable and non-implantable devices. 2. The ISO 13485:2016 certification is an international standard that that describes the requirements for a QMS…
June 19, 2019—FREMONT, CA—PrinterPrezz, Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced the company has achieved ISO 13485:2016 certification for Quality Management Systems for medical devices. ISO 13485:2016 certification is a requirement for regulatory purposes and is an international standard that…
June 11, 2019—FREMONT, CA—PrinterPrezz, Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced that it has partnered with UCSF Surgical Innovations, an incubator-accelerator for medtech innovators at UC San Francisco. Together, both groups are focused on bringing advanced medical devices to market…
From medical implants to smart capsules, the use of 3D printing in the medical arena continues to grow. PrinterPrezz—a company focused on the creation of advanced medical devices using metal 3D printing, nano and semiconductor technologies—aims to take the industry to a new level with the assistance of Greg Morris, a pioneer in additive manufacturing (AM). He was recently…
“We’re thrilled to have Greg join our board of advisors to help PrinterPrezz revolutionize the medical 3D printing industry,” said Shri Shetty, CEO of PrinterPrezz. “We’re at an inflection point, where additive manufacturing has the potential to transform modern medicine and surgery, creating new options and improved clinical outcomes for doctors and patients. Greg’s experience…
Medical device manufacturer PrinterPrezz Inc., located in Fremont, California, USA, has announced that Additive Manufacturing pioneer Greg Morris, formally of Morris Technologies and GE Aviation, is to join its advisory board. Having founded Morris Technologies in Cincinnati in 1995, Morris is widely recognised for his contribution to the growth of Additive Manufacturing, both on a…
PrinterPrezz Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced that Greg Morris, a pioneer in additive manufacturing and formally of GE Aviation, will join its advisory board.
Medtech-focused additive manufacturing company PrinterPrezz Inc. (Fremont, CA) announced today that 3D-printing pioneer Greg Morris has joined its advisory board. His company, Morris Technologies, which he founded in 1995, was acquired by GE in 2012, contributing to its prominence in becoming a leader in additive manufacturing for aerospace and automotive applications, said the press release…
In 2019, California-based medifacturing company PrinterPrezz announced the news of signing a customer agreement with SI-BONE. The agreement is based on a deal of developing services for advanced 3D-printed orthopedic devices and implants. SI-BONE hopes to capitalize on the expertise of PrinterPrezz to come up with the next generation of medical devices. Brows Complete Research Report https://www.marketresearchfuture.com/reports/orthopedic-implant-market-838
“Medical is the next frontier for additive manufacturing,” said Greg Morris. “Like the aerospace and automotive industries before, the medical landscape is the next logical step for additive to make a profound—life changing, in fact—difference for both healthcare providers and patients. PrinterPrezz is at the intersection of manufacturing and medical, and I’m excited to contribute…
April 1, 2019—FREMONT, CA-(BUSINESSWIRE)— PrinterPrezz Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced that Greg Morris, a pioneer in additive manufacturing and formally of GE Aviation, will join its advisory board. Having founded Morris Technologies in 1995, Greg paved the way for additive manufacturing and its adoption both on…
Shri Shetty, CEO of PrinterPrezz, said, “SI-BONE is at the forefront of providing minimally invasive surgical products for the sacroiliac joint, seeking to help patients around the world who are suffering from low back pain caused by SI joint dysfunction. We’re working closely with SI-BONE to accelerate ground-breaking development of high-performance devices to meet the…
SI-Bone signed an agreement with PrinterPrezz to develop and build services for potential future 3D-printed implants. Three things to know: 1. SI-Bone pioneered the minimally invasive sacroiliac joint fusion implant, iFuse Implant System. Under the agreement, PrinterPrezz will work with the company to develop additional 3D-printed solutions. “Our surgeons are asking for more metal 3D-printed medical solutions…
“Every year the percentage of people being impacted by injuries from sports and a growing aging population increases. We’re expecting the orthopedic market size to increase from $5 billion to $50 billion dollars,” said Shri Shetty, CEO of PrinterPrezz. “SI-BONE is at the forefront of providing minimally invasive surgical products for the sacroiliac joint, seeking…
The young company, which opened its first Innovation Center in the Silicon Valley in December 2018, has already entered into some promising collaborations. For instance, in January it revealed a partnership with 3D scanning specialist Growshapes LLC to scale PrinterPrezz’s 3D imaging lab. Now, the company will offer its services and expertise to SI-BONE, Inc., a…
“Our surgeons are asking for more metal 3D-printed medical solutions to help their patients, and we continue to push forward our R&D to deliver solutions for those who can benefit from surgical treatment of SI joint disorders,” said Scott Yerby, chief technology officer of SI-BONE. “Working with PrinterPrezz’s local Bay Area Innovation Center enables extremely…
February 12, 2019—FREMONT, CA-(BUSINESSWIRE)—PrinterPrezz, Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced that it has signed a customer agreement with SI-BONE, Inc. (NASDAQ: SIBN), a medical device company that pioneered the minimally invasive surgical treatment of the sacroiliac joint with the iFuse…
February 06, 2019—FREMONT, CA-(BUSINESSWIRE)—PrinterPrezz, Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced that it has selected the city of Fremont, California, as home of its headquarters to coincide with its first Innovation Center. “Fremont has long been a hub for both…
Andrew Sutherland of Quizlet and Shrinivas Shetty of PrinterPrezz shared their work and insights in a packed meeting room at an event-program by AlligatorZone® where kids meet cool startups, held yesterday at (and with the support of) Fremont Main Library in Fremont, CA. Thanks to everyone for their participation in making this a grand and…
The Fremont-based center offers customers medical device digital design services with clinicians, engineers, and materials scientists. It also includes access to an open-innovation environment featuring a broad set of software, scanners, and hardware to optimize 3D print design and prototyping for a variety of applications, from implants to medical devices, surgical aids, and prosthetics, according to the company.…
As has become tradition, we’ve gathered some of Silicon Valley’s foremost experts on topics relevant to Fremont’s top industries to discuss their educated predictions for the coming year. These macro-level insights help shape our Economic Development team’s focus for how best to support our businesses and economy. As you read about what’s in store for…
Using technology from Growshapes, PrinterPrezz readies its imaging lab with the latest 3D scanning solutions. January, 23, 2019—FREMONT, CA-(BUSINESSWIRE)—PrinterPrezz Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced an agreement with Growshapes LLC, a leading provider of advanced 3D scanners, to scale…
PrinterPrezz Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, announced the opening of its first Innova¬tion Center in the Silicon Valley. Leveraging a multi-disciplinary team of medical doctors, engineers, and materials scientists, PrinterPrezz uses its proprietary technology processes that combine proven metal 3D…
Medical device company PrinterPrezz, which combines metal 3D-printing, nanotechnologies and surgical expertise to design and manufacture medical devices that can be brought to market faster, opened its first innovation center in Fremont, Calif.
In addition to the digital design services for medical devices, PrinterPrezz provides a complete additive manufacturing solution. The PrinterPrezz Innovation Center includes multiple onsite powder-bed metal 3D printers capable of printing in materials such as titanium and stainless steel, as well as a suite of proprietary nanotechnologies including nano-metrology, nano-coating and nano-etching to enhance device…
There’s a new life sciences company in town that’s aiming to take the medical manufacturing world by storm. Joining Fremont’s more than 120 life sciences companies, PrinterPrezz is blending medical innovation with advanced design and manufacturing resources as they assist customers with early concept development to volume production. PrinterPrezz is leveraging Fremont’s established manufacturing history…
The new facility, PrinterPrezz Innovation Center, is a one-stop shop solution. It will bring design, prototyping, and manufacturing under one roof, saving time and costs for PrinterPrezz’ clients. At PrinterPrezz, customers can have their products 3D printed in a range of materials, which includes the engineering-grade PEEK, and titanium alloy known as Ti6Al4V-ELI. Clients will…
Medical device company PrinterPrezz, which combines metal 3D-printing, nanotechnologies and surgical expertise to design and manufacture medical devices that can be brought to market faster, opened its first innovation center in Fremont, Calif. Here are four details: 1. The innovation center includes device digital design services for clinicians, engineers and materials scientists. 2. To optimize…
Over the past few months, we have been quietly working with PrinterPrezz, the new additive manufacturing startup in the Bay Area focused on the medical field. Growshapes partnered with PrinterPrezz to help them select the right 3D scanner solutions to advance in their mission “to bring more ideas for innovative medical devices to market faster,…
Combining technology with resources and innovation is the underpinning of a new innovation center in Silicon Valley. On Dec. 12, PrinterPrezz Inc., a company combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next-generation medical devices, announced the opening of its first Innovation Center in Silicon Valley. The center will employ a multi-disciplinary…
PrinterPrezz Connects Medicine and Manufacturing to Become World’s First Medifacturing™ Company FREMONT, Calif.—PrinterPrezz Inc., a trailblazer in combining metal 3D printing, nanotechnologies and surgical expertise to design and manufacture next generation medical devices, today announced the opening of its first Innovation Center in the Silicon Valley. Leveraging a multi-disciplinary team of medical doctors, engineers, and…